젠틀몬스터 신사옥, 성수, 서울

PERI 제품

당사의 다양한 제품군을 확인하여 프로젝트 및 적용 분야에 적합한 제품을 찾아보세요.

PERI 제품은 전체 제품군에 통합적으로 적용될 수 있습니다. 시스템 거푸집 공사, 시스템 비계, 단품 및 악세서리, 동바리, 토목&인프라 제품 및 합판이 당사의 건설 현장에 적합한 솔루션을 제공합니다. 아래에서 페리의 전체 제품군을 확인하십시오. 

제품 보기

아래의 필터 기능을 사용하여 원하는 페리 제품을 찾아보세요.

 

VT 20
Shoring system for very large loads in bridge constructions as well as for special applications in industrial construction
The PERI InSite Pressure Sensor was used on the Regent Street Flyover project in Leeds.
The PERI InSite Temperature sensor installation
TRIO is a universal formwork system which places the highest emphasis on uncomplicated forming operations and the reduction of shuttering times.<br/>
The universal lightweight formwork for walls, columns and slabs
Flexible girder wall formwork, also for high-grade architectural concrete surfaces.<br/>
The lightweight and proven aluminium panel slab formwork with short shuttering times.
멀티프롭 동바리를 사용하여 다양한 층고에 적용할 수 있는 슬라브 거푸집 시스템
The choice of girder is based on project- specifi c requirements: the GT 24 Lattice Girder allows large spans and thus reduces the number of parts to be moved. The VT 20K Solid Web Girder is the cost-effective solution for smaller slab thicknesses.<br/>
All heights, all cross-sections, regardless whether square or rectangular-shaped<br/>
Elements for walls and columns, cross-sections up to 75 cm x 75 cm
The drive rails are available in two variants, depending on the type of project at hand: RCS MAX C and CL. Both allow the platforms to be moved safely in 750 mm increments.
PERI RCS climbing combines the advantages of different systems in a modular system that makes the easy adaptation to site-specific requirements possible.<br/>
With PERI SCS, the loads from the fresh concrete pressure are transferred without formwork ties through the brackets into the climbing anchors of the previous concreting section.<br/>
The Self-Climbing System ACS-R with the one-sided reinforcement scaffold in advance.
The CB climbing system provides safe working conditions with wall formwork at all heights.<br/>
HR Render image of the PERI VTC Tunnel Carriage
Supporting structures cost-effectively erected with system – with materials and expertise from a single source
Either the Heavy-Duty Tower as the Truss Girder are adjustable to the correct height and length.
Construction of superstructures using the balanced cantilever method – fast and dimensionally-accurate
The DK and SK tie systems serve to ensure subsequent, reliable sealing of tie points.
The cost-effective solid web girder
The versatile lattice girder with high load-bearing capacity.
With the ISC SONO WZ Analyser, the water content of fresh concrete can be quickly and precisely determined on site.
Used as a cost-saving lightweight individual prop and cost-effective shoring tower<br/>
Extremely flexible work scaffold for a wide range of applications.<br/>
Extremely adaptable and with a high load-bearing capacity
The lightweight stair tower for flexible access solutions
For high requirements regarding load bearing capacity and accessibility.
For wide-span working platforms and temporary pedestrian footbridges
LGS standard components are the basis for variable roof shapes.
Stable and flexibe shoring system with high load-bearing capacity
The galvanized tubular steel slab prop from PERI with up to 50 kN load-bearing capacity
The large-size formwork panel for almost joint-free fairfaced concrete finishes.
The PERI Birch formwork panel is a high-quality plywood for almost any type of application.<br/>
General overhaul for your formwork
QR Codes Scan with Smartphone - Mobile Logistics by PERI
SONO Hub 콘크리트 센서
Concrete Sensor Technology by Vemaventuri